Skip to content

Versatile pads for daily maintenance and deep cleaning

Suprashine Regular

Flexible diamond pads in five grits, from 400 for deep cleaning to 8000 for the highest gloss. Suitable for almost every hard and resilient floor, coated or uncoated, with water only.

Suprashine Regular, diamond pads in every grit

Grits and item numbers

The colour of the pad tells you the grit. Item numbers are for a 20" (508 mm) pad; for another size, change the ending to the diameter in inches, for example -17 for 432 mm. Two pads per pack.

Suprashine Regular grits with item numbers and use
GritColourItem no.Use
Regular 400 pad, red400redSRG-0400-20Very deep cleaning
Regular 800 pad, white800whiteSRG-0800-20Deep cleaning
Regular 1800 pad, yellow1800yellowSRG-1800-20Daily maintenance, matt
Regular 3500 pad, green3500greenSRG-3500-20Daily maintenance, gloss
Regular 8000 pad, silver8000silverSRG-8000-20Maximum gloss, delicate surfaces

Regular prices

The price is for one pad and the same for every grit. Pads come in packs of 2. The first column is without VAT, the second with VAT.

from11.11 €excl. VAT, per piece

Round pads

Round pads, Suprashine Regular: prices per piece excluding and including VAT
SizeDimensionsExcl. VATIncl. VAT
5"127 mm127 mm11.11 €13.55 €
6"152 mm152 mm11.47 €13.99 €
7"178 mm178 mm11.93 €14.55 €
8"203 mm203 mm13.51 €16.48 €
9"229 mm229 mm14.30 €17.45 €
10"254 mm254 mm18.29 €22.31 €
10.63"270 mm270 mm18.29 €22.31 €
11"279 mm279 mm18.29 €22.31 €
12"305 mm305 mm18.29 €22.31 €
13"330 mm330 mm21.43 €26.14 €
14"356 mm356 mm23.04 €28.11 €
15"381 mm381 mm25.42 €31.01 €
16"406 mm406 mm29.40 €35.87 €
17"432 mm432 mm33.34 €40.67 €
18"457 mm457 mm36.98 €45.12 €
19"483 mm483 mm38.69 €47.20 €
20"508 mm508 mm38.69 €47.20 €
21"533 mm533 mm47.26 €57.66 €
22"559 mm559 mm53.18 €64.88 €
24"610 mm610 mm64.27 €78.41 €
27"686 mm686 mm70.06 €85.47 €
28"711 mm711 mm76.87 €93.78 €

Rectangular pads

Rectangular pads, Suprashine Regular: prices per piece excluding and including VAT
SizeDimensionsExcl. VATIncl. VAT
9 × 12"229 × 305 mm229 × 305 mm22.22 €27.11 €
10 × 17"254 × 432 mm254 × 432 mm30.65 €37.39 €
12 × 18"305 × 457 mm305 × 457 mm38.90 €47.46 €
12 × 22"305 × 559 mm305 × 559 mm43.44 €53.00 €
14 × 20"356 × 508 mm356 × 508 mm44.45 €54.23 €
14 × 22"356 × 559 mm356 × 559 mm47.26 €57.66 €
14 × 24"356 × 610 mm356 × 610 mm50.04 €61.05 €
14 × 28"356 × 711 mm356 × 711 mm54.19 €66.11 €
14 × 32"356 × 813 mm356 × 813 mm66.70 €81.37 €

Utility pad

Utility pad, Suprashine Regular: prices per piece excluding and including VAT
SizeDimensionsExcl. VATIncl. VAT
5.25 × 10.5"133 × 266 mm133 × 266 mm15.31 €18.68 €

Suprashine.si cenik 2026. Prices in euros; the first column excludes VAT (22 %, Slovenia). Prices are subject to change.

Work out the price

Grit
Price per piece
38.69 € + VAT
Total, excl. VAT
77.38 €

94.40 € incl. VAT

Send an inquiry

We prepare an offer with the delivery time and send it by email.

Also rectangular and as a utility pad

Regular also comes in 9 rectangular sizes for machines with a rectangular plate, and as a 5.25 × 10.5" utility pad for hand work: edges, corners and stairs. Same grits, water only.

Rectangular
9 × 12" – 14 × 32"
from 22.22 € + VAT
Utility pad
5.25 × 10.5"
from 15.31 € + VAT
Rectangular and utility pads

More gloss on coated floors, with water only

On linoleum and polymer-coated floors Regular cleans and polishes at the same time. The manufacturer’s programme is a daily clean with RG 3500 and, every one or two months, two passes with RG 800 to remove the dirty top layer.

+20 points
One pass with a scrubber-dryer lifts the gloss of a coated floor by about 20 points.
80+ points
With a high-speed burnisher and RG 8000 you can lift gloss quickly to 80 points or more.
1000 rpm
On rubber and soft PVC rolls, burnish at no more than 1000 rpm.

Burnish only once new layers of finish have dried completely, to prevent scratching.

Green RG 3500 pad seen from above

Which floors

Where the manufacturer recommends Regular, from its methods table per floor type. Pick a floor and the pad finder shows you the full sequence.

Restore and strip

difficult

Very dirty, damaged or old floors; removing finish, stains and scratches.

Deep cleaning

medium

Periodic thorough cleaning when routine cleaning is no longer enough.

Gloss upgrade

medium

Intensive gloss upgrade and closing the pores.

Daily maintenance

easy

Routine cleaning with a scrubber-dryer or single-disc machine, water only.

High-speed burnishing

optional

Optional: daily or periodic burnishing with a high-speed machine for even more gloss.

Machines and sizes

Machines
Low-speed and high-speed machines: scrubber-dryers, single-disc buffers, burnishers. Use with a velcro pad holder.
Sizes
5" to 28" diameter, rectangular from 9 × 12" to 14 × 32" and a 5.25 × 10.5" utility pad. All sizes in millimetres · Rectangular and utility pads
Surfaces
concrete and polished concrete, PVC, vinyl and linoleum, rubber, epoxy and coatings, marble, granite, terrazzo, ceramic and porcelain tiles

How to use it

  • Fit the pad on the machine’s velcro pad holder.
  • Work with water only. The manufacturer recommends detergent only in extreme cases.
  • On a high-speed burnisher keep the pad slightly wet: less dust, better gloss and a longer pad life.
How to use, step by step

Frequently asked questions

Which grit should I use for daily cleaning?

On most floors 3500 green; on matt PVC, vinyl and rubber also 1800 yellow. On very soft coatings and delicate surfaces, 8000 silver.

Does Regular work on coated floors?

Yes. On linoleum and polymer-coated floors 3500 green is the first choice for daily maintenance, 800 white removes the dirty top layer, and 8000 silver is for burnishing. One pass with a scrubber-dryer lifts gloss by about 20 points.

Can I use Regular on a high-speed burnisher?

Yes, Regular works on low-speed and high-speed machines. 8000 silver is the daily and periodic burnishing pad for coated and uncoated floors. Keep the pad slightly wet, and on rubber and soft PVC stay at or below 1000 rpm.

When do I use 400 red?

For very deep cleaning of porous ceramic tiles, matt porcelain and granite, and to restore epoxy, vinyl and PVC with damaged PUR.

Tell us about your floor. We’ll suggest the right pad.

Tell us your floor and machine. We suggest the pads, size and sequence, and send you an offer.

  1. You describe floor and machine
  2. We suggest pads and size
  3. We send you an offer
Send an inquiryShow phone

Opening hours: Mon–Fri 8:00–16:00