A bright atrium with a mirror-gloss floor reflecting the columns and lights

Suprashine diamond pads

Glossy floors.Water only.

Pads made with industrial diamonds clean and polish in one pass, on the machine you already own. No chemicals. The shine builds with every clean.

Find the right pad Send an inquiry

Illustration: a Suprashine pad and water

Water only
No detergents or chemicals. Safer for people, floors and machines.
Your machine
Scrubber-dryer, single-disc or burnisher, with a velcro pad holder.
Up to 3.5×
cheaper floor cleaning with diamond pads, says the manufacturer.
Since 1987
Superabrasive makes its diamond tools in its own factory.

How diamonds make a floor shine

Every Suprashine pad carries industrial diamonds in a bond. Coarse diamonds grind, medium ones hone, fine ones polish, and microdiamonds keep the shine every day. Here is what happens to the floor surface, magnified.

Illustration, not a measurement. Which pads you need depends on the floor and its condition.

01
Grinding
Hybrids have a true resin-metal hybrid bond with coarse diamonds. On concrete, terrazzo and stone they grind out deep scratches, stains and orange peel. Heavy Duty 220 strips emulsions and coatings with water and preps the floor for a new coating.
Pads for this stage
- Hybrids 50–100
- Heavy Duty 220
02
Honing
Medium grits erase the marks of coarse grinding until only fine scratches remain. The surface is flat and smooth, but still matt. At this stage Heavy Duty 400 and Regular 400 also deep clean and restore epoxy, vinyl and PVC.
Pads for this stage
03
Polishing
Fine grits level even the micro-scratches. The surface starts to reflect light evenly and the gloss rises. HP 800 and HP 1800 lift the floor to a higher gloss step by step during routine cleaning.
Pads for this stage
04
Daily gloss
Microdiamonds lift traffic dirt during daily cleaning with water only and keep the surface smooth. The reflection stays crisp and the gloss doesn’t fade. Regular 8000 is for maximum gloss and delicate surfaces.
Pads for this stage

Gloss that doesn’t fade after three weeks

With traditional floor care the floor shines after each burnish or new coat, then traffic and chemicals wear the gloss down again. Then comes stripping, a new coat and a new bill. Diamond pads polish the floor mechanically during routine cleaning, so the gloss stays, or keeps rising.

~10 days: to the first visible results with High Performance
30+ days: to maximum gloss with routine cleaning
+20 points: of gloss in one scrubber-dryer pass on coated floors

Traditional floor care

Schematic, after Superabrasive’s charts and figures.

The colour tells you what the pad does

A lower number cleans deeper, a higher one polishes to a higher gloss. Pick one pad for daily work, or run them in sequence to restore a floor.

Heavy Duty 220 · brown

Stripping coatings

Heavy stripping of emulsions and coatings from PVC, linoleum, rubber and epoxy with water only. Prepares the floor for a renewal or permanent coating.

from 11.11 € excl. VAT

Heavy Duty pads

Regular 400 · red

Very deep cleaning

Porous ceramic tiles, matt porcelain and granite. Restoring epoxy, vinyl and PVC with damaged PUR.

from 11.11 € excl. VAT

Regular pads

Regular 800 · white

Deep cleaning

PVC, vinyl, rubber and natural wood. Two passes remove the dirty top layer of a coating.

from 11.11 € excl. VAT

Regular pads

Regular 1800 · yellow

Daily, matt

Routine cleaning of matt PVC, vinyl and rubber.

from 11.11 € excl. VAT

Regular pads

Regular 3500 · green

Daily, gloss

The all-round daily pad: medium and hard coatings, PVC, vinyl, rubber, natural wood.

from 11.11 € excl. VAT

Regular pads

Regular 8000 · silver

Maximum gloss

Very soft coatings, delicate surfaces and high-gloss porcelain. Also for high-speed burnishing.

from 11.11 € excl. VAT

Regular pads

Water instead of chemicals

The diamonds do the work mechanically, so no detergent is needed. Unless it is an extreme case, the manufacturer recommends water only, on every floor.

Traditional floor care and Suprashine compared
	Traditional care	Suprashine
What you need	Detergents, waxes, finishes, strippers and standard pads	Water and a diamond pad
Steps	Cleaning, separate burnishing, periodic stripping and recoating	Cleaning and polishing in one pass
Gloss	Shines after a new coat, then fades	Stays, or rises with every clean
Machine	Your existing machine	The same machine, with a velcro holder
Residue	Chemical residue on the floor, in waste water and in the machine	Just water, which is easy on the machine
Safety	Handling concentrates and fumes	No chemicals for staff or visitors
Cost	Chemicals, frequent pad changes and periodic restoration	Up to 3.5× cheaper cleaning (manufacturer)

Four lines, one logic

From daily cleaning to stripping and restoring stone. All with water only.

All products

On the machine you already have

Fit the pad on a standard velcro holder and work as before, with water instead of detergent.

Scrubber-dryer
For daily cleaning of large areas. Also the best choice for Hybrids.
Single-disc machine
For smaller areas, deep cleaning and stripping.
High-speed burnisher
For gloss upgrades and daily burnishing, with slightly wet pads.

Sizes from 5" to 48" and rectangular pads

Ride-on scrubber with Suprashine pads in a warehouse

Results in the field

Examples from Superabrasive’s own case studies.

Shopping mall, marble

−49%

in yearly cleaning costs, while the floor went from no gloss to high gloss. Daily HP 3500 and water only.

Before: standard pads and chemicals9,640 €

Suprashine4,906 €

EUR per year

up to −80%

Electronics industry, ESD PVC

in yearly daily-cleaning costs. Just two pads, RG 800 and RG 3500, instead of certified ESD chemicals.

−50%

Polymer-coated floors

coating use and half the labour in periodic maintenance, with a chemical-free mechanical top scrub.

1 pad

High-traffic supermarkets

for daily cleaning of terrazzo, concrete, stone and epoxy: HP 3500, or HP 1800 in tougher conditions.

Source: Superabrasive, “10 examples of how to use Suprashine pads”.

From the factory to your floor

Superabrasive has made diamond tools for floor grinding, polishing and maintenance since 1987, all in its own production. The factory is in Bulgaria, the headquarters in the USA. Suprashine is its range of floor maintenance pads, on the market since 2021.

Just Grind d.o.o. of Komenda, Slovenia, distributes the pads. We help you choose the pad and size, prepare an offer and advise you as you switch over.

Contact superabrasive.com

Superabrasive factory in Bulgaria — Factory, Bulgaria

Superabrasive headquarters in the USA — Headquarters, USA

Frequently asked questions

Do I really need no chemicals at all?

Yes. The diamonds in the pad clean and polish the floor mechanically, so water is enough. The manufacturer recommends detergents only in extreme cases.

Do I need a new machine?

No. The pads fit most low-speed and high-speed machines: scrubber-dryers, single-disc machines and burnishers. Use them on a standard velcro pad holder.

Which floors are the pads for?

Almost every floor except carpet: concrete and polished concrete, terrazzo, marble, granite, epoxy, PVC, vinyl, linoleum, rubber, ceramic tiles, wood and ESD floors.

When will I see results?

With High Performance pads the manufacturer states that results can be seen in as soon as 10 days of routine cleaning, with maximum gloss usually reached after 30+ days. On coated floors one scrubber-dryer pass lifts gloss by about 20 points.

How long does a pad last?

It depends on the floor, traffic, machine and pressure. For High Performance pads the manufacturer states up to 645,000 sq ft, about 60,000 m².

How do I order?

There is no web shop yet. Send an inquiry or call us: we suggest the pads, size and sequence and send you an offer. Pads come in packs of two.

Where next

Tell us about your floor. We’ll suggest the right pad.

Tell us your floor and machine. We suggest the pads, size and sequence, and send you an offer.

You describe floor and machine
We suggest pads and size
We send you an offer

Send an inquiry Show phone

Opening hours: Mon–Fri 8:00–16:00

Glossy floors.Water only.

How diamonds make a floor shine

Grinding

Honing

Polishing

Daily gloss

Gloss that doesn’t fade after three weeks

The colour tells you what the pad does

Stripping coatings

Very deep cleaning

Deep cleaning

Daily, matt

Daily, gloss

Maximum gloss

Water instead of chemicals

Four lines, one logic

Regular

High Performance

Heavy Duty

Hybrids

What floor do you have?

Concrete and polished concrete

Marble and natural stone

Terrazzo

Granite and basalt, untreated

Epoxy and resin

Epoxy terrazzo and painted epoxy

Rubber and soft PVC rolls

Vinyl, wood or stone look

Very thin PVC

Linoleum and polymer-coated floors

Granite and basalt, treated

Varnished wood

Natural or oiled wood

Ceramic and grès tiles

Matt or unglazed porcelain

Satin or glazed porcelain

High-gloss porcelain

On the machine you already have

Scrubber-dryer

Single-disc machine

High-speed burnisher

Results in the field

From the factory to your floor

Frequently asked questions

Where next

Tell us about your floor. We’ll suggest the right pad.